How is a zirconia crown shade chosen? Shade guides, daylight, whitening and try-ins

The shade of a zirconia crown is chosen with a shade guide, a set of standard sample teeth, under light close to daylight and at the start of the visit, before the teeth dry out. On the most common guide, the letters A, B, C and D show the shade family (A reddish-brown, B yellowish, C greyish, D reddish-grey) and the numbers show darkness; A1 and B1 are the lightest natural shades, while BL codes are lighter shades for whitened teeth. If only a few teeth are crowned, the new crowns are matched to the remaining natural teeth; if you want a lighter colour, whitening is done first and the shade chosen afterwards. At Dent32 in Beylikdüzü, shade selection is done with the founding dentist, Dr. Hüseyin Aşcı, who works mainly with zirconia crowns and veneers, using photographs and try-ins.

How is a zirconia crown shade chosen? Shade guides, daylight, whitening and try-ins

What do shade guide codes mean?

CodeMeaning
A1–A4Reddish-brown family, the most common in natural teeth. A1 lightest, A4 darkest
B1–B4Yellowish family; B1 is among the lightest natural shades
C1–C4Greyish family
D2–D4Reddish-grey family
BL1–BL4 (OM)Shades lighter than the natural range, for whitened teeth

Some clinics and labs also use more detailed guides that assess lightness, saturation and hue separately. The code is only the start; photographs and shade notes are sent to the lab as well.

Why do light, moisture and timing matter?

  • Light: Shade is chosen in neutral light close to daylight. Yellow bulbs or strong coloured light change how a shade looks.
  • Moisture: When the mouth stays open, teeth dry and look a few shades lighter. Shade is therefore chosen at the start of the visit, before preparation and impressions.
  • Surroundings: Bright lipstick or clothing can change perception; a neutral bib may be used.
  • Eye fatigue: Looking for too long makes differences harder to see; short, repeated looks are more reliable.

Should I whiten my teeth first?

Crowns, fillings and veneers cannot be whitened; only natural teeth lighten. If you want your uncrowned teeth lighter, whitening comes before the crowns. Afterwards there is usually a wait of a few weeks for the colour to settle, and the crown shade is then chosen to match. See can crowns, veneers and fillings be whitened and teeth whitening.

Is choosing a very white shade a good idea?

Dr. Hüseyin AşcıDr. Hüseyin AşcıFounding dentist, Dent32 Beylikdüzü

The most common mistake I see in shade selection is choosing the lightest shade in the mirror and forgetting the rest of the face. A shade that suits the whites of the eyes, the skin tone and the lips makes a smile look both more natural and brighter.

Graduate of Istanbul University Faculty of Dentistry; works mainly on implants, All-on-4 and All-on-6, zirconia crowns and veneers. About Dr. Hüseyin Aşcı

If all the teeth are being crowned, a lighter shade can be chosen, but without harmony with the face the teeth can look artificial. Skin tone, the whites of the eyes, lip colour, age and tooth length are considered together. Very light shades can also reduce translucency, so teeth may look chalky.

For a white yet natural smile, see Hollywood smile.

How does the material affect colour?

OptionColour and light behaviour
Monolithic zirconiaStrong; newer types are more translucent, but naturalness on front teeth can be limited
Layered zirconiaTranslucency and colour gradients can be built into the biting edge
e.maxHigh translucency; often chosen for a natural look on front teeth

The colour of the tooth underneath also matters: a darkened, root-filled tooth may need a more opaque material. See zirconia or porcelain, what is an e.max crown and discoloured dead teeth.

Photographs and try-ins

The chosen shade is photographed next to the shade tab and sent to the lab. Crowns are tried in before cementing; approval is given in daylight, from different angles and after you have seen them in the mirror. If the shade is not what you expected, it is corrected before cementing.

Shade selection at Dent32

At Dent32, shade selection for zirconia crowns and veneers is done with the founding dentist, Dr. Hüseyin Aşcı, and documented with photographs and try-ins. About Dr. Aşcı: who is Dr. Hüseyin Aşcı?; for the zirconia process in Beylikdüzü: zirconia crowns in Beylikdüzü.

Dent32 is at Barış Mah., Ginza Lavinya, E-5 Yanyolu No:30 D:179, 34520 Beylikdüzü, Istanbul and is open Monday to Saturday, 9:00–22:00. To book, call or WhatsApp +90 555 011 33 68, or use our contact page. At the examination we share the findings, the options and the approximate cost in writing; you are under no obligation to start treatment afterwards.

Frequently asked questions

What is the most popular shade for zirconia?

There is no single right shade. The A family is most common in natural teeth; when all teeth are crowned, A1, B1 or BL shades are often discussed. The shade is chosen for your face and remaining teeth.

Is A1 or B1 whiter?

Both are among the lightest natural shades; B1 looks slightly more yellow-light, A1 slightly warmer. The difference depends on light and complexion, so try-ins in the mouth are needed.

Does zirconia turn yellow over time?

Zirconia itself practically does not change colour. The natural teeth around it may darken with time, making a difference more noticeable.

Should I whiten before getting crowns?

If you want your uncrowned teeth lighter, yes. Whitening comes first, and the crown shade is chosen once the colour has settled.

What if I do not like the shade?

Crowns are tried in before cementing. If the shade does not meet your expectations, the lab corrects it.

Have a question?Message on WhatsApp